EasyManua.ls Logo

Toro Z Master 4000 Series - Figure 61

Toro Z Master 4000 Series
80 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Note: Ensure that the engine is cool so that the
oil has had time to drain into the sump.
3. T o keep dirt, grass clippings, etc., out of the
engine, clean the area around the oil-ll cap and
dipstick before removing it ( Figure 61 ).
g008804
g31 1705
Figure 61
Changing the Engine Oil
Note: Dispose of the used oil at a recycling center .
1. Start the engine and let it run for 5 minutes.
Note: This warms the oil so that it drains better .
2. Park the machine so that the drain side is slightly
lower than the opposite side to ensure that the
oil drains completely .
3. Disengage the blade-control switch (PT O) and
engage the parking brake.
4. Shut of f the engine, remove the key , and wait
for all moving parts to stop before leaving the
operating position.
5. Drain the oil from the engine ( Figure 62 ).
g008804
g027734
Figure 62
49

Table of Contents

Other manuals for Toro Z Master 4000 Series

Related product manuals