Toro Z Master G3 - Adjusting the Anti-Scalp Rollers

To Next Page

To Previous Page

4.Selectaholeintheheight-of-cutbracket

correspondingtotheheight-of-cutdesiredand,

insertthepin(Figure26).

5.Pushonthedecklift,pullbackonthetransport

lock,andslowlylowerthemowerdeck.

Figure26

1.Deckliftpedal

3.Transportlock

2.Cutofheightpin

AdjustingtheAnti-Scalp

Rollers

Wheneveryouchangetheheight-of-cut,itis

recommendedtoadjusttheheightoftheanti-scalp

rollers.

1.Disengagethebladecontrolswitch(PTO),move

themotioncontrolleverstotheneutrallocked

positionandsettheparkingbrake.

2.Stoptheengine,removethekey,andwaitforall

movingpartstostopbeforeleavingtheoperating

position.

Figure27

1.Anti-scalproller4.FlangeNut

2.Spacer

5.Bolt

3.Bushing

Figure28

1.Anti-scalproller3.FlangeNut

2.Bushing4.Bolt

Figure29

1.Anti-scalproller4.FlangeNut

2.Spacer

5.Bolt

3.Bushing

Main Page

Table of Contents2
Introduction2
Safety4
- Safe Operating Practices4
- Toro Riding Mower Safety5
- Sound Pressure6
- Sound Power6
- Vibration6
- Slope Chart7
- Safety and Instructional Decals8
Product Overview13
- Controls14
- Specifications15
Operation15
- Adding Fuel15
- Filling the Fuel Tank16
- Checking the Engine Oil Level17
- Breaking in a New Machine17
- Using the Rollover Protection System (ROPS)17
- Think Safety First17
- Operating the Parking Brake18
- Operating the Mower Blade Control Switch (PTO)19
- Operating the Throttle19
- Operating the Choke19
- Operating the Ignition Switch20
- Using the Fuel Shut-Off Valve20
- Starting and Stopping the Engine20
- Stopping the Engine21
- The Safety Interlock System22
- Driving Forward or Backward22
- Stopping the Machine24
- Adjusting the Height of Cut24
- Adjusting the Anti-Scalp Rollers25
- Adjusting the Flow Baffle Cam Locks26
- Positioning the Flow Baffle26
- Positioning the Seat27
- Using the Drive Wheel Release Valves27
- Using the Side Discharge28
- Transporting Machines28
- Loading Machines29
- Using the Z Stand30
- Operating Tips31
Maintenance32
Recommended Maintenance Schedule(S)32
Lubrication33
- Greasing and Lubrication33
- Where to Grease the Mower33
- Lubricate Caster Wheel Hubs34
Engine Maintenance35
- Servicing the Air Cleaner35
- Servicing the Engine Oil36
  - Changing the Engine Oil37
  - Changing the Engine Oil Filter38
- Servicing the Spark Plug39
- Check Spark Arrester (if Equipped)40
Fuel System Maintenance40
- Replacing the Fuel Filter40
- Servicing the Fuel Tank41
Electrical System Maintenance41
- Servicing the Battery41
- Installing the Battery42
- Servicing the Fuses43
Drive System Maintenance44
- Checking the Seat Belt44
- Checking the Rollover Protection System (ROPS) Knobs44
- Adjusting the Tracking44
- Checking the Tire Pressure45
- Checking the Wheel Hub Slotted Nut45
- Adjusting the Caster Pivot Bearing45
- Using the Clutch Shim46
Cooling System Maintenance48
- Cleaning the Engine Screen and Engine Oil Cooler48
- Cleaning the Engine Cooling Fins and Shrouds48
- Check and Clean the Hydraulic Unit Shrouds48
Brake Maintenance49
- Adjusting the Parking Brake49
Belt Maintenance50
- Inspecting the Belts50
- Replacing the Mower Belt50
- Replacing the Hydraulic Pump Drive Belt51
Controls System Maintenance52
- Adjusting the Control Handle Position52
- Adjusting the Motion Control Linkage53
- Adjusting the Motion Control Damper54
- Adjusting the Motion Control Neutral Lock Pivot54
Hydraulic System Maintenance55
- Servicing the Hydraulic System55
Mower Deck Maintenance57
- Leveling the Mower Deck57
- Servicing the Cutting Blades59
- Removing the Blades60
- Removing the Mower Deck61
- Replacing the Grass Deflector62
Cleaning63
- Cleaning under the Mower63
- Waste Disposal63
Storage64
- Cleaning and Storage64
Troubleshooting65
Schematics67

Toro Z Master G3 - Adjusting the Anti-Scalp Rollers

Table of Contents

Other manuals for Toro Z Master G3

Related product manuals