Toro Z-Master - User Manual

Operator’s Manual
IMPORTANT: Read this manual carefully. It contains information about your
safety and the safety of others. Also become familiar with the controls and
their proper use before you operate the product.
FORM NO. 3321–445
Z – Master
Collection System
for
OUT
FRONT Z – 48” MOWER
Model No. 79434– 891637 & Up

Summary

Introduction

Warning System

Explanation of danger, warning, and caution signals used in the manual.

Safety

Safety and Instruction Decals

Description of safety decals and instructions, emphasizing replacement of damaged ones.

Installation

Install Blower

Instructions for installing the blower assembly, including PTO pulley.

Mount Blower and Idler Assemblies

Install Chute

Install Hopper

Install Wire Harness

Operation

Operating the Power Take Off (PTO)

Procedure for engaging and disengaging the power take off (PTO) switch.

Engaging the PTO

Steps to engage the PTO, including lever and brake adjustments.

Disengaging the PTO

Steps to disengage the PTO by closing the cover.

Dumping the Hopper

Recycler Operation

Bagging Tips

Maintenance

Service Interval Chart

Replacing the Blower Belt

Troubleshooting

Blower does not rotate

Identifies possible causes and corrective actions for a non-rotating blower.

Abnormal vibration

Identifies possible causes and corrective actions for abnormal vibration issues.

Clippings not being collected

Identifies possible causes and corrective actions for failure to collect clippings.

Toro Z-Master Specifications