Toro Z449 Z Master - Positioning the Seat; Unlatching the Seat

Figure 23
Position B
Use this position when bag ging .
Figure 24
Position C
T his is the full open position. T he sug g ested use
for this position is as follo ws .
• Use in tall, dense g rass mo wing conditions .
• Use in w et conditions .
• Lo w ers the engine po w er consumption.
• Allo ws increased g round speed in hea vy
conditions .
• T his position is similar to the benefits of the
T oro SFS mo w er .
Figure 25
Positioning the Seat
T he seat can mo v e forw ard and bac kw ard.
P osition the seat where y ou ha v e the best control
of the mac hine and are most comfor table .
Important: T o adjust, mo v e the lev er
sidew ays to unlock seat ( Figur e 26 ).
Slide the seat to the desired position and release
lev er to loc k in position.
Figure 26
1. Adjustment lever
Unlatching the Seat
Push the seat latc h rearw ard to unlatc h the seat.
T his will allo w access to the mac hine under the
seat ( Figure 27 ).
24