Torque F9 - Page 33

41
40
28
3
29
CAUTION: MAKE SURE CABLE IS
ROUTED UNDER FRAME BOLTS.
TO START:
THREAD JAM NUT
ON TO CABLE END.
THREAD CABLE END
INTO CARRIAGE AS
SHOWN IN INSET VIEW.
ROUTE CABLE IN
DIRECTION OF ARROWS.
SEE CAUTIONS
BELOW.
LEFT SIDE
CAUTION: When routing cables, make sure that the cables are seated
in the groove of the pulleys and underneath all retaining bolts, pins or
brackets. Failure to do so, may result in damage to cable.
STEP 27 CABLE ROUTING
33