Need help?Do you have a question about the Torque TANK M1 and is the answer not in the manual?
General| Wheels | Yes |
|---|---|
| Type | Sled |
| Resistance Type | Magnetic |
| Warranty | 1 year |
| Surface Compatibility | All |
Loosely tighten bolt connections for the initial assembly stage.
Assemble wheels and securely tighten all relevant bolts.
Attach the push handles to the rear frame, ensuring proper alignment.
Adjusting the resistance levels from Neutral to Hard.
Procedure for adjusting the push/pull bar forward for use.
Guidance on TANK M1 operation, including weight plate usage.
Instructions for attaching the optional V-strap to the push/pull bar.
Instructions for attaching the optional tow rope to the push/pull bar.
Instructions for attaching the optional wheelbarrow handles.
Instructions for installing the optional upper and lower wall mounts.
Details on storing the TANK M1 using the wall mount system.
Instructions for storing push and wheelbarrow handles with the wall mount system.
Procedures for inspecting and lubricating the TANK M1 for optimal performance.
Step-by-step guide for removing the shroud from the TANK M1.
Instructions on how to properly adjust the chain tension on the TANK M1.
To Next Page
