TO SET THE CORRECT CHAIN TENSION
FOLLOW THESE STEPS:
1) TIP M1 BACK SO THAT IT RESTS ON THE
REAR WHEELS AND PUSH HANDLES. AS
SHOWN.
2) LOOSEN ALL FOUR BOLTS ONE FULL
TURN EACH. (BOLT SHOULD BE LOOSE
ENOUGH TO ALLOW THE BRAKE MODULE
TO MOVE). ALLOW GRAVITY TO PULL THE
BRAKE MODULE DOWNWARD REMOVING
THE EXCESS SLACK.
3)
SECURELY
RE-TIGHTEN THE FOUR BOLTS.
18
CHAIN ADJUSTMENT
To Next Page
Loading...
