16
INSPECTION & LUBRICATION
INSPECTION:
ATTENTION:
PLEASE ENSURE THAT ALL TIRES ARE INFLATED
TO 30 PSI. FAILURE TO DO SO MAY RESULT IN
TANK VEERING DURING USE.
Once a month, check for loose bolts on frame and wheels. Tighten if
necessary.
Once a month, remove shroud as shown on
PAGE 16
and check
that the chain and sprockets are clean, free of rust, dust and grime.
Make sure that the chain is properly lubricated.
If chain ever becomes loose, see
PAGE 17
to adjust
chain.
Once a month, check tire pressure and inflate if needed.
LUBRICATION:
Once a month, the sprockets should be cleaned and the chain
should be lubricated.
RECOMMENDED LUBRICATION:
Use a Dry lubrication for indoor
use, and wet lubrication for outdoor use. Most bicycle shops carry a
variety of different lubricants and can recommend a lubricant based
on the conditions where the TANK will be used.
#TorqueFitness #TorqueTANK
https://www.instagram.com/torquefitnessusa/
https://www.youtube.com/c/TorqueFitness
https://www.facebook.com/groups/thetankcommunity
To Next Page
Loading...
