B-291600XPi Series UPS Installation and Operation Manual – 60616-014
Item Brief Description
Description
On LCD
U A D
Svc/
QC
F Default Remark
857 RemotEye Data Link Status RMTI Datlink R/
(W by
SNMP
Only)
R/
(W by
SNMP
Only)
R R R 0 0: Unknown
1: Link Down
2: Link Up
Note: Only SNMP can write. Others, read only.
858 RemotEye Network Link
Status
SRMTI Netlink R/
(W by
SNMP
Only)
R/
(W by
SNMP
Only)
R R R 0 0: Unknown
1: Link Down
2: Link Up
Note: Only SNMP can write. Others, read only.
* - Changing parameter requires restarting Unit.
1 - Command Parameters 522, 523, and 819 are only accessible to control board rmware version 1.05 and above. If the commands are visible
in the display but the user receives an error when trying to write, the control board rmware is a version earlier version that does not support these
three commands.
To Next Page
Loading...
