A6 1600XPi Series UPS Installation and Operation Manual – 60616-014
STANDARD MODELS: 14 – 22 KVA (CONT’D)
Capacity 14 kVA (11.9 kW)
1
18 kVA (15.3 kW)
1
22 kVA (18.7 kW)
1, 5
Remote Contacts Standard (INV, BYP, BATT, LB, AC, FLT)
RS232 ASCII Interface Toshiba UPS Communication Protocol 2.0
RemotEye 4
(Standard with XPi)
Remote communications package (HTTP/HTTPS, SNMP, Modbus TCP/RTU, BACnet IP/
MSTP) via RJ-45 or RS-485
Mechanical Design
Enclosure Enclosure of unit made from sheet metal meeting NEMA1 and UL
Size (HxWxD) (max)
39.0 x 17.5 x 36.1 in.
(991 x 445 x 917 mm)
Paint System Powder coating
Fan Panel
Panel mounted on back of UPS to allow for
easy replacement of fans
Battery System
Battery Replacement
Slide out battery packs accessible from front of UPS,
factory or authorized service center serviceable only
Battery Packs Designed for battery acid leakage containment with (6) batteries per pack
Battery Pack Size (HxWxD) max.
5.0 x 7.3 x 19.0 in.
(127 x 185 x 462 mm)
Battery Pack Quantity 8
Battery Type Lead Acid 9AH/12V (FR)
Toshiba Part Number for Battery Pack 51896-FS 60995-FS
1. Input/output gures rated for 240 volts unless otherwise stated. Output ratings given for 0.85PF are only valid when the input voltage
is greater than 204 volts; otherwise, ratings given for 0.70PF are applicable.
2. Derate to 18.7 kVA (15.9 kW) for 50 Hz operation.
To Next Page
Loading...
