Toshiba 2000 - Network Device Switch

User's Manual
OPERATING BASICS
4-8
Network Device Switch
This application is used to select one network device on your system and to
prevent inconsistent routing table problems on TCP/IP networks.
Using the switch
To select a network device, follow the steps below.
1. In Windows XP, click start, point to All Programs, click Network Device
Switch.
Left-click the Network Device Switch icon on the Task bar to display a
device menu.
Figure 4-5 Sample of a network device menu (left click)
2. Click the network device you want to enable. A check will appear beside the
enabled devices. Devices without checks are disabled.
Auto Switch menu
Right-click the Network Device Switch icon to diaplay the Auto Switch menu.
Figure 4-6 Auto Switch menu (right click)