Toshiba 24SL415U - Chapter 4: Initial Setup and Menu; Initial Setup

25
Initial Setup
When you first turn on or reset the TV, the Initial
Setup window will appear.
Note:
•
You can stop Initial Setup by pressing .
However, if you do not finish Initial Setup, the
Initial Setup screen will appear every time
you turn on your TV. To finish Initial Setup, see
“Changing Initial settings” ( page 29).
•
does not work until Menu Language,
Time Zone, and Location have been set.
1無
Menu Language
Select a language.
2無
Time Zone
Time Zone
Daylight Saving Time
Eastern
Off
Local Time Setting
Select a time zone.
3無
Daylight Saving Time
Time Zone
Daylight Saving Time
Eastern
Off
Local Time Setting
Select On or Off. Press .
4無
Location
To use the TV for displaying in a store showroom, please
select [Store]. [Home] mode is recommended for normal use.
(ENERGY STAR® qualified)
Home
Location
Select Home for normal home use. Press .
Chapter 4: Initial Setup and Menu
5無
ANT/CABLE
To select Antenna :
Then, select Next . Press .
Select Auto , Digital , or Standard ( “Setting the
Channel Tuning Mode” on page 33). Press .
To select Cable:
Then, select Next . Press .
Note: If you do not want to scan channels, you
do not need to make a selection for ANT/CABLE.
Select Next and press to skip this step.
First, select
Antenna .
First, select
Cable .