Toshiba 27D46 - Using the Front Panel Lock Feature; Labeling Channels

Using the front panel lock feature
You can lock the front panel buttons to prevent your settings from being
changed accidentally (by children, for example.) When the front panel
lock is in ON, all control buttons on the TV front panel (except POWER)
do not operate.
To lock the front panel:
1. Press MENU, then press 4 or _- to display the LOCKS menu.
2. Press _, or V to display the password entering mode.
3. Use the Channel Number buttons (0-9) to enter your password,
then press ENTER. The LOCKS menu appears.
4. Press A or V to highlight FRONT
PANEL LOCK and press 4 or _ to _j_
highlight ON. _....
LOCK
5. Press EXIT to return to normal viewing ....... o_F
VIDEO LOCK
If a button on the front panel is ............
pressed, the message "NOT ............
_,:SELECT ,_J:ADJ UST
AVAILABLE" appears.
To unlock the front panel:
Press and hold the VOL V button on the TV front panel for about 10
seconds until the message "FRONT PANEL LOCK: OFF" appears
on-screen.
To unlock the front panel using the menus:
Select OFF in step 4, above.
Labeling channels
Channel labels appear above the on-screen channel number display
each time you turn on the TV, select a channel, or press the RECALL
button. You can choose any four characters to create a channel label.
To create channel labels:
1. Select a channel you want to label.
2. Press MENU, then press ,_ or i_
until the OPTION menu appears.
3. Press A or V to highlight CH
LABEL.
4. Press 4 or _ to display the CH
LABEL menu. SET/CLEAR will be
highlighted.
5. Press _ or _ to highlight SET.
6. Press ENTER to highlight LABEL.
7. Repeatedly press _ or _ until the
character you want appears. Press
ENTER.
Note:
The character will change as foflows:
--_--_ 0---9 _ A'-oZ
8,
ONOFF TIMER _FF
FAVORITE CH
AB_ E l
,_ :SELECT I_* :ADJUST
LAeEL
OPTION MENU I_
_:S_LECT *_t:AOJUST
_ITER:SET _×IT:END
SPACE <-"-> + _ --
Repeat step 7 to enter the rest of the
characters.
If you would like a blank space in the
label name, you must choose an
SET
OPTION MEI_U _"
I_*:AOJUST ENTEmSET
empty space from the list of characters; otherwise, a dash will
appear in that space.
9. Repeat steps 1-8 for other channels. You can assign a label to
each channel.
10. Press EXIT to return to normal viewing.
TV front panel (27D46)
I
Buttons that can be blocked
TV front panel
(27D46)
VOL'_"
Recall
Channel
Numbers
Channel/\v
Menu/
Enter
Exit
To erase channel labels:
1. Tune the TV to the channel whose label
you want to erase.
2. Press MENU, then press _1or _- until the
OPTION menu appears.
3. Press _, or 'V to highlight CH LABEL.
4. Press _ or _- to display the CH LABEL
menu. SET/CLEAR will be highlighted.
5. Press ,4 or _ to highlight CLEAR.
6. Press ENTER.
7. Repeatsteps 1-6toeraseotherchannel labels.
Note:
To return to the OPTION menu from the CH
LABEL menu, press _, or V to highlight
OPTION MENU, then press _ or _.
26
J3W41121A(E) P22-30 26 14/03/2006, 3:37 PM