Selecting the video input source
Press TV/VIDEO to view a signal from another device connected to
your TV, such as a VCR or DVD player. You can select ANT, VIDEO 1,
VIDEO 2, or ColorStream, depending on which input jacks you used to
connect your devices (see "Connecting your TV" on page 7.)
SOURCE SELECTION
m A NT
I. VIDEO1
2. VlDEOZ
m ¢olorStream
Pressing TV/VIDEO on the remote
control displays the current signal
source (press TVNIDEO again or
0-3 to change)
Note:
When ColorStream is selected, the video
OUT jack does not output a signal. To receive
a video OUT signal, you must use a standard
video or S-video connection instead.
Setting the clock
You must set the clock before you can program the ON/OFF timer.
To set the clock: (Example: "8:30 AM" March, 25 (SAT), 2006)
1. Press MENU, then press 4 or _, to
display the SETUP menu. _ _j _ _
2. Press A or V to highlight CLOCK
LANGUAGE ENGLISH
SET, then press I_.
3. Press 4 or I_ to set the MONTH,
then press V. ,,:......... •.........
4. Set the DAY, YEAR and TIME as in
step 3.
After setting the clock, the date and
time function starts automatically.
5. Press EXIT to return to the normal
screen.
CLOCK SET
_T========================================================================_jIIII_jjIIIIIIIIIIIIIIIIIIIIIIIIIIIII_
oA¥ I_SUN_
YEAR 2_0_
TIME 12:00AM
_=,,SELECT t=,,ADJUST
NTEmSET _×IT,ENO
Setting the ON/OFF timer
This feature allows you to program the TV to turn on or off
automatically at a set time. If you program the ON TIMER to "DALLY,"
the TV will turn on every day at the same time to the same channel
until you clear the ON TIMER.
To set the ON timer: (Example: Turning on the TV to channel 12
at 6:30 AM, DAILY)
1. Set the clock, if you have not already done so (see above.)
2. Press MENU, and then press _1or _ to display the OPTION menu.
3. Press A or V to highlight ON/OFF TIMER.
4. Press ,qlor _ to highlight SET, then press ENTER. The ON/OFF
TIMER menu appears.
5. Press A or V to highlight ON TIMER,
then press _. to highlight the hour
position.
6. Press A or v to set the desired hour,
then press I_.
7. Set the desired minutes and channel,
as in step 6.
8. Press _ or t_ to select ONCE or
DAILY, then press ENTER.
9. Press EXIT to return to normal
viewing.
To set the OFF timer:
Select OFF TIMER in step 5, above.
To cancel the ON/OFF timers:
Select CLEAR in step 8, above.
Press EXIT to return to normal viewing.
ON,OFF TIMER
OFF TIMER _"
12:00AM
OPTION MENU CLEAR
q_,SELECT _,A[_JUST
EXIT:END
ON,OFF TI_ Er_
OFF TIMER _,
12,OOA_
CLEAR
OPTION M_I_U
,_,ADJUST _NTER,SET
EXIT:END
27
Note:
After a power failure or disconnection of the
power, the clock settings will be lost.
TV/Video
Menu/
Enter
Exit
Notes:
o After a power failure or disconnection of the
power, the ON/OFF timer settings will be lost.
• To return to the OPTION menu from the
ON/OFF TIMER menu, press A or _ to
highlight OPTION MENU, then press _ or _'.
J3W41121A(E) P22-30 27 14/03/2006, 3:37 PM
To Next Page
Loading...
