Selecting the audio languages
When two or more audio languages are included in a digital signal, you
can select one of the audio languages.
To select the audio language:
1. Press MENU, then press _1or _ to display theAUDIO menu.
2. Press A or V to highlight AUDIO LANGUAGE, then press _'.
AUDtO
MTS STEREO
8ASS 2_
TREeLE 2_
OIGITAL OUTPUT PCM
T
@ :SELECT @ :A DJUST
3. Press A or V to select the desired language, then press ENTER.
4. Press EXIT to return to normal viewing.
Selecting the digital output format
You can choose the format of the digital audio output signal.
To select the digital output format:
1. Press MENU, then press ,_ or I_ to display the AUDIO menu.
2. Press Jk or V to highlight DIGITAL OUTPUT.
MTS ST EsREOSASS
TREBLE _E_ALANCE
AUDIO LANGUAGE
3. Press ,,_or _- to highlight PCM or DOLBY DIGITAL.
4. Press EXIT to return to normal viewing.
Using the StableSound ®feature
The StableSound feature limits the highest volume level to prevent
extreme changes in volume when the signal source is changed.
To turn on the StableSound _ feature:
1. Press MENU, then press _ll or 1_to display the AUDIO menu.
2. Press _ or V to highlight STABLE SOUND.
3. Press _ or _ to highlight ON.
Menu
Exit
_._:SELECT _ :ADJ UST
4. Press EXIT to return to normal viewing.
To turn off the StableSound _>feature:
Highlight OFF in step 3 above.
* Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.
33
J3W41121A(E) P31-Back 33 14/03/2006, 3:39 PM
To Next Page
Loading...
