Introduction
Connecting
your TV
Using the
Remote Control
Setting up
your TV
Using the TV’s
Features
Appendix
Index
19
Learning about the remote control
POWER turns the TV on and off
RECALL displays information on-screen (page 49)
LIGHT illuminates the keypad for five seconds
TIMER sets the TV to turn off at a specific time (page 44)
TV/VIDEO selects the video input source (page 42)
MUTE mutes the sound (page 45)
TV/CABLE/VCR switches between TV, Cable and VCR modes
(pages 15–16)
CH y z cycles through programmed channels (page 24)
Channel Numbers allow direct access to channels (page 24)
VOL y z adjusts the volume level
CH RTN returns to the previously selected or memorized channel
(page 26)
MENU accesses on-screen programming menus (page 20)
ENTER sets programmed menu information (page 20)
y z x • select or adjust programming menus (page 20)
FAV z and FAV y cycle through favorite channels (page 25)
FAVORITE accesses the favorite channel search function (page 32)
PIC SIZE cycles through the five picture sizes: Natural,
Theater Wide 1/2/3, and Full (page 28)
C.CAPT accesses the closed caption menu (page 43)
EXIT closes programming menus (page 20)
POP turns the POP
(picture-out-picture)
feature on and off (page 31):
POP CH y and POP CH z
select the POP channel (page 31)
SOURCE selects the POP picture source (page 31)
STILL freezes the POP picture (page 32)
SWAP switches the main and POP pictures (page 32)
VCR Buttons access VCR functions (page 15):
STOP stops a videotape
REC starts recording a videotape
PLAY plays a videotape
FF fast forwards a videotape
REW rewinds a videotape
TV/VCR toggles between TV and VCR
when viewing while recording
123
456
789
ENT
100
0
CH
VOL
POWER
TIMER
RECALL
TV/VIDEO
MUTE
TV
CABLE
VCR
CH RTN
PIC SIZE
EXIT
LIGHT
STOP SOURCE
ADV/
POP CH
ADV/
POP CH
FAV
FAV
PLAY POP
REC TV/VCR REW FF
STILL SWAP
FAVORITE
MENU/
C.CAPT
ENTER
Note:
The error message “Not Available” will appear
if you press a key for a function that is not
available.
CT-90086
To Next Page
Loading...
