Introduction
Connecting
your TV
Using the
Remote Control
Setting up
your TV
Using the TV’s
Features
Appendix
Index
42
POWER
CHANNELVOLUMEMENU
TV/VIDEO
Note:
• When ColorStream HD1/HD2 or DVI is
selected, the video OUT jack does not
output a signal. To receive a video OUT
signal, use a standard video or S-video IN
connection instead of the ColorStream or
DVI/HDCP connection.
• If you select ColorStream HD1/HD2 or DVI
while the POP picture is active, the POP
window will close.
123
456
789
ENT
100
0
CH
VOL
POWER
TIMER
RECALL
TV/VIDEO
MUTE
TV
CABLE
VCR
CH RTN
PIC SIZE
EXIT
LIGHT
ADV/
POP CH
ADV/
POP CH
FAV
FAV
FAVORITE
MENU/
C.CAPT
ENTER
TV/VIDEO
MENU
yzx •
TV/VIDEO
TV front panel
Selecting the video input source
Press TV/VIDEO on the remote control or TV to view a signal coming
from another device connected to your TV, such as a VCR or video disc
player. You can select ANT 1, ANT 2, VIDEO 1, VIDEO 2, VIDEO 3,
ColorStream HD1, ColorStream HD2, or DVI, depending on which
input jacks you used for connecting your devices (see “Connecting your
TV” on page 7.)
SOURCE SELECTION
0–7: TO SELECT
0: ANT 1
1: VIDEO 1
2: VIDEO 2
3: VIDEO 3
4: ColorStream HD1
5: ColorStream HD2
6: DVI
7: ANT 2
SOURCE SELECTION
TV/VIDEO: TO SELECT
ANT 1
VIDEO 1
VIDEO 2
VIDEO 3
ColorStream HD1
ColorStream HD2
DVI
ANT 2
Labeling the video input sources
The video label feature allows you to label each input source for your
TV, from the following preset list of labels:
–: Uses the default label name
VCR: Video cassette recorder
DVD: DVD video
DTV : Digital TV set-top box
SAT : Satellite box
CBL : Cable box
HD : DVI/HDCP device (see page 13)
To label the video input sources:
1. Press MENU, and then press x or • until the CUSTOM menu
appears.
2. Press y or z to highlight VIDEO LABEL.
1
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
234567891011 12 13 14 15 16 17 18 19
20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
12345678910111213141516171819
20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
CUSTOM
TIMER 0 0 0
CC C2
FAVOR I CH
OFF
1TE
FAVOR I CH2TE
V
BACKGROUND
I
DEO
CH
LABEL
LABEL
ING
3. Press x or • to display the VIDEO LABEL menu.
4. Press y or z to highlight the video source you want to label.
5. Press x or • to select the desired label for that input source.
CUSTOM
VIDEO LABEL
VIDEO1
VIDEO2
VIDEO3
HD1
VCR/ DVD / DTV /SAT CBL/
–
–
–
–
–
DVI
Color Stream
Color Stream
CUSTOM MENU
–
6. Finish labeling the other video sources as desired. To return to the
previous menu, press y or z to highlight CUSTOM MENU,
and then press x or •.
7. To exit the menu, press EXIT.
Pressing TV/VIDEO on the remote
control displays the current signal
source. To change the signal source,
press TV/VIDEO again, or directly
select by pressing 0–7.
Pressing TV/VIDEO on the TV changes
the current signal source
Note:
The HD (high-definition) label is available for
DVI mode only. See “Selecting the video input
source” above, and “Connecting a device to
the DVI/HDCP input” on page 13.
EXIT
To Next Page
Loading...
