Toshiba 34HD82 - Changing Channels; Changing Channels Using Speedsurf; Adjusting the Tilt Correction Feature

Introd
Connecting
your TV
Using the
Remote Control
Setting up
your TV
Using the TV’s
Features
Appendix
Index
24
POWER
CHANNELVOLUMEMENU TV/VIDEO
123
456
789
ENT
100
0
CH
VOL
POWER
TIMER
RECALL
TV/VIDEO MUTE
CTV
CABLE
VCR
CH RTN
PIC SIZE
EXIT
LIGHT
ADV/
POP CH
ADV/
POP CH
FAV
FAV
FAVORITE
MENU/
C.CAPT
ENTER
MENU
yzx •
Channel yz
Channel
Number
Upper channels
↑
Current channel (highlighted)
↓
Lower channels
Channel label (if set)
MENU CHANNEL zy
3. Press y or z to highlight ADD/ERASE.
1
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
2345678910111213141516171819
20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
12345678910111213141516171819 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
SET UP
LANGUAGE
CLOCK
ANT
ADD ADD ERASE/ERASE/
TV
CH
PROGRAM
CABLE/ CABLE
1 ANT1/2
SET
ENGL SHI
00:00
TILT CORRECTION
QU I C K CONNECT GU I DE
0
4. Press x or • to select ADD or ERASE, depending on the
function you want to perform.
5. Repeat steps 1–4 for other channels you want to add or erase.
Changing channels
To change to a specific channel (programmed or unprogrammed):
Press the Channel Number buttons (0–9 and 100).
For channels 100 and higher, press the 100 button, and then the
next two numbers. For example, to select channel 125, press
100, 2, 5.
To change to the next programmed channel:
Press Channel y or z on the TV or remote control.
Changing channels using SpeedSurf
To use SpeedSurf to change to a specific programmed channel:
1. Press and hold Channel y or z for about one second. The TV
will enter the SpeedSurf mode.
4 CNN
7 CBS
11 FOX
13 ESPN
16 TBS
2. Repeatedly press or hold Channel y or z while the SpeedSurf
mode is on-screen to scroll the channel list. Release the button to
display the highlighted channel.
Adjusting the tilt correction feature
When you install or move the TV, the picture may suffer from color
shading and/or picture tilt because of terrestrial magnetism. If either
condition occurs, the following adjustment should be made for the
best possible picture.
To adjust the tilt correction:
1. Press MENU, and then press x or • until the
SET UP menu appears.
2. Press y or z to highlight TILT CORRECTION.
3. Press x or • to adjust the picture tilt from +10 to
–10.
TV front panel
(Continued from previous page)
SET UP
LANGUAGE
CLOCK
ANT
ADD ADDERASE/
TV
CH
TILT CORRECTION
PROGRAM
CABLE/ CABLE
1 ANT 1/2
SET
ENGL SHI
00:00
QU I C K CONNECT GU I DE
+
7