Toshiba 40PU200 series - TV Tuning and Quick Menu Usage; Manual Tuning and Channel Sorting; Using the Quick Menu

Tuning or if you would like to preset channels
to speci c position numbers one by one.
Manual Tuning
Pos. Label
2
3
4
1
6 Press  or  to select the programme position
you want to arrange and press Q to display the
breakdown menu.
Press  or  to select an item, then press  or
 to select the item as shown below.
Manual Tuning
Position
0 1 B/G A0 On
ACEG
H
FDB
A. Position selection
B. System (Sound) (- page 29)
C. Colour System (- page 29)
A : Automatic (factory set), P : PAL,
S : SECAM, N4 : NTSC 4.43 (MHz),
N3 : NTSC 3.58 (MHz)
If the colour of a certain channel is abnormal,
the automatic colour system selection (A)
may have malfunctioned, or sound system
selection is wrong. In such a case, select
another colour and/or sound system (-
page 29).
D. Position skip selection
Press  or  to turn the position skip option
on “8” or o “(”. The position will then be
skipped when you select channels with PU
or Pu. The “8” mark will appear beside a
position number when you use the Number
button on the remote control.
E. Channel search operation
Press  to search up the band or  to search
down the band.
Press  or  repeatedly until your desired
channel is displayed.
When a station is found, it will be displayed.
NEVER PRESS ANY OTHER BUTTONS WHILE
THE SET IS TUNING.
F. Manual Fine Tuning
Press  or  until better picture and sound
are obtained.
G. Signal Booster
If the receiving signal is weak/strong and the
picture is noisy, the picture may be improved
when using this function.
Press the  or  to turn the Signal Booster
On or O .
H. Label
Station labels appear under the programme
position display each time you turn on the TV,
select a channel, or press .
To change or create station labels:
1) Press  or  repeatedly to select a
character for the  rst space, then press 
or .
(blank space)
2) Repeat step 1) to enter the rest of the
characters. If you would like a blank space
in the label name, you must choose a
blank space from the list of characters.
Press Q to store your settings.
Notes:
• The Quick Setup, Location, Auto Tuning, Manual
Tuning menu can also be display at any time from
the SETUP menu.
• When you preset the channel which sound of
broadcast transmission system adopts “M” system
(- page 29), the sound system may not be tuned
correctly if the radio waves transmit badly. At that
time, preset the channel by Manual Tuning.
Using the Quick Menu
Press QUICK to display the Quick Menu and use 
or  to select the option.
Quick Menu
Picture Mode
Sleep Timer
Media Player
Power Bass Booster
00:00
Off
On
Dynamic
Signal Booster
Note:
Quick Menu items are di erent depending on the
current mode.
Quick menu item Description
Picture Mode
- page 14.
Media Player
- page 19.
Sleep Timer
- page 16.
Power Bass Booster
- page 16.
Signal Booster
- page 11.
Interval Time
- page 20.
Slide Show E ect
- page 20.
Device Information
- page 19.
SOUND
- page 15.
Repeat
- pages 21, 23.
PICTURE
- page 14.
– 11 –
233240PU200SeriesEN0620.indd11233240PU200SeriesEN0620.indd11 2012/06/268:04:422012/06/268:04:42