Toshiba 40PU200 series - Advanced Sound and Feature Settings; Sound Quality and Enhancement; Digital Audio Output and Other Features

Selecting the monaural programmes
If sound distortion, interruptions or silence arises in
the low sound volume level, setting the e Mono 2
mode will mitigate the problem.
When a monaural programme is received, e Mono
appears and press g.
• Use the modes: Mono 1 and Mono 2
Note:
On some cases, the reception of stereo/bilingual
broadcasts may not be possible after switching on the
e Mono 2 mode.
Adjusting the sound quality
You can adjust the basic sound quality.
• Use the menu: SOUND
• Use the items: Bass, Treble and Balance
• Use the button:  and 
Using the Power Bass Booster
Power Bass Booster helps to create rich bass.
• Use the menu: SOUND
• Use the item: Power Bass Booster
• Use the modes: Super, Normal and O
Using the Dynamic Range Control
This feature allows control of compression for some
digital audio signal (MPEG-1 and MPEG-2 audio
programes are not supported).
• Use the menu: SOUND
• Use the item: Dynamic Range Control
Using the Audio Level O set
Sometimes there can be large changes in volume
when switching from an ATV channel or an external
input. Using this feature reduces these volume
di erences.
• Use the menu: SOUND
• Use the item: Audio Level O set
• Use the button:  and 
Setting the Digital Audio Output
Select a digital audio output mode appropriate
for the ampli er connected to the DIGITAL AUDIO
output terminal.
• Use the menus: SETUP and AV Connection
• Use the item: Digital Audio Output
• Use the modes: Auto and PCM
Auto: This mode outputs Dolby Digital or
PCM to the digital audio output socket
providing it is being broadcast.
PCM: Select this when a 2ch digital stereo
ampli er is connected to the TV. When
you select a Dolby Digital or MPEG
audio track, the sound is converted to
the PCM (2ch) format and output.
Other features settings
Selecting the TIMER menu
The Timer is especially useful if you want the TV to
turn itself on or o after a selected period of time.
• Use the menu: TIMER
• Use the items: Sleep Timer, On Timer and On
Timer Position
• Use the button: Number buttons (0-9),  and 
Notes:
• When setting the On timer, press  or  to select
the On Timer Position and enter the program
position number you want to watch. Press EXIT to
exit the menu. Set the Standby mode by pressing
on the remote control.
• The TV will automatically turn itself o after
approximately 2 hours if you do not operate the TV
after turned on by on timer function.
Using the Auto Format
When the TV receives a true HDMI signal picture
and the Auto Format is On, it will automatically be
displayed in HDMI signal format, irrespective of the
TV’s previous setting.
• Use the menu: FUNCTION
• Use the item: Auto Format
Activating Blue Screen
With the Blue Screen function On, the screen
will automatically turn blue and the sound will be
muted (except for PC input) when no signal is being
received.
• Use the menu: FUNCTION
• Use the item: Blue Screen
Setting the Automatic Power Down
The TV will automatically turn itself o (standby)
after approximately 4 hours, if you don’t touch the
control buttons on the remote control or on the TV
control panel.
• Use the menu: FUNCTION
• Use the item: Automatic Power Down
Panel Lock
Panel Lock disables the buttons on the TV. All
buttons on the remote control can still be used.
• Use the menu: FUNCTION
• Use the item: Panel Lock
Note:
When Panel Lock is On, a reminder will appear when
the buttons on the TV are pressed.
If the standby button is pressed, the TV will switch o
and can only be brought out of standby by using the
remote control.
– 16 –
233240PU200SeriesEN0620.indd16233240PU200SeriesEN0620.indd16 2012/06/268:04:432012/06/268:04:43