Toshiba 40PU200 series - Advanced Picture Settings and Modes; Picture Modes and Display Options; Customizing Picture Preferences

Super Live
This setting will enlarge a 4:3 image to  t the screen
by stretching the image horizontally and vertically,
holding better proportions at the centre of the
image. Some distortion may occur.
PC Normal
Use this setting for PC connected via HDMI or RGB/
PC terminal when receiving PC signal format. This
setting will display the image correctly without
distortion or picture clipping.
PC Wide
Use this setting for PC connected via HDMI or RGB/
PC terminal when receiving PC signal format. This
setting will display the image without picture
clipping.
Dot by Dot
“Dot by Dot” is a non-scaling display. Depending on
the input signal format, the picture is displayed with
side panels and/or bars at the top and bottom (e.g.
VGA input source).
Notes:
• Using the special functions to change the size of
the displayed image (e.g. changing the height/
width ratio) for the purpose of public display or
commercial gain may infringe on copyright laws.
• If the aspect ratio of the selected format is di erent
from the one of the TV transmission or video
programme, it can cause a di erence in vision.
Change to the correct aspect ratio picture size.
• When using the PC connected via HDMI or RGB/
PC terminal, the moving image quality may be
deteriorated.
Using the picture still
• Press to freeze the picture.
Even if an image is frozen on the TV screen, the
pictures are running on the input source. Audio
continues to be output as well.
To return to a moving picture, press again.
(Moving)
(Still)
Note:
If you use this function except for the purpose of your
private viewing and listening, it may infringe the
copyright protected by the copyright laws.
Activating the Picture Mode
This TV o ers the choice of personalising the picture
style.
AutoView, Dynamic, Standard, Mild, Movie, Eco
Mode, Game and PC are preset options and a ect
many features/settings within the TV.
• Use the menus: PICTURE and Picture Settings
• Use the item: Picture Mode
Notes:
• If using Eco Mode will be changed the dark screen,
and you will be able to reduce power consumption.
The Backlight mode is not available in the Eco
Mode.
• Game mode is available in external input mode
(other than aerial input). When you select Game
mode, suitable widescreen formats will be selected.
• PC mode is available in RGB/PC input mode or HDMI
input mode.
Activating the picture preferences
You can customise current Picture Mode settings
as desired. For example, while selecting “Dynamic,”
if you change the following items, such as Picture
Settings items, your new setting is saved as
Dynamic-user.
• Use the menus: PICTURE and Picture Settings
• Use the items: Backlight, Contrast, Brightness,
Colour, Tint and Sharpness
Setting the Contrast Booster
Contrast Booster improves the contrast of the
picture.
• Use the menus: PICTURE and Picture Settings
• Use the item: Contrast Booster
• Use the modes: High, O , Low and Middle
Using the Cinema Mode
A movie  lm’s picture runs at 24 frames a second,
whereas movie software such as DVD, etc., that you
enjoy watching on TV at home runs at 30 (NTSC)
or 25 (PAL) frames a second. To convert this signal
– 14 –
233240PU200SeriesEN0620.indd14233240PU200SeriesEN0620.indd14 2012/06/268:04:422012/06/268:04:42