Toshiba 40XV700A - Page 27

27
Using the TV’s features (General)
Adjusting the Sound Navigation
Youcancustomizethesoundmodesettings.Selectthe
appropriate mode in accordance with the installation
location of the TV (
Stand
or
Wall
) and adjust the
equalizeron-screenasdesired. 
1
From the
SOUND
menu, press
s
or
r
to select
Advanced Sound Settings
and then press
Q
�
2
Press
s
or
r
to select
Sound Navigation
, and
then press
Q
�
SurroundOff
Voice Enhancement On
Sound Navigation
Dynamic Bass Boost High
Advanced Sound Settings
3
Press
v
or
w
to select
Stand
or
Wall
depending on
how your TV is installed, and then press the
RED
button�
4
Press
v
or
w
to select the frequency range you want
toadjustfromtheequalizerwindow,andthenpress
s
or
r
to adjust the level�
TV MountingStand
Sound Navigation
+20
0
-20
100 330 1K 3.3K 10K [Hz]
00000 [Level]
Equalizer
5
Repeat step 4 for other frequencies�
Using the Advanced Sound Settings
Surround
and
Dynamic Bass Boost
help to create an
enhanced surround sound experience with deep, rich bass
from stereo sound sources� Your TV’s audio will sound
fuller, richer, and wider�
Voice Enhancement
helpstoemphasizedialogue.It
will be easier to hear voices over other background audio�
1
From the
Advanced Sound Settings
, press
s
or
r
to select
Surround
�
2
Press
v
or
w
to select
Off
,
Spatial
or
Cinema
�
Voice Enhancement
:
To turn the vocal emphasis
effect
On
or
Off
�
Dynamic Bass Boost
:
or
Ext. Woofer
To select the desired bass
expansion level (
Off
,
Low
,
or
High
)�
Note:
Ext. Woofer
is displayed instead of
Dynamic Bass
Boost
when
Woofer
is set to
External
in the
AV
Connection
menu (
-
page 39).
Using Dolby Volume
This feature provides a consistent sound volume regardless
of programmes, channels or input sources�
1
From the
SOUND
menu, press
s
or
r
to select
Dolby Volume
�
2
Press
v
or
w
to select
Low
,
High
or
Off
�
Notes:
• This feature does not affect the audio signal output
from the DIGITAL AUDIO OUT and MONITOR
output terminals.
• If you feel it is hard to listen to audio due to signal
status, turn off Dolby Volume.
Adjusting Audio Level Offset
Sometimes there can be large changes in volume when
switching from a DTV 5�1ch to a DTV 2ch, an ATV
channel, or an external input� Using this feature reduces
these volume differences�
1
Set the volume level usually used when watching a
5�1ch programme�
2
Tune to a channel which is DTV 2ch, ATV or an
external input�
3
From the
SOUND
menu, press
s
or
r
to select
Audio Level Offset
and press
Q
�
4
Press
s
or
r
to select an option, and then press
v
or
w
to adjust the volume level�
0
0
-5
Audio Level Offset
ATV
DTV 2ch
External Input
Notes:
• The available item changes depending on the
current input source. For example, when watching
a DTV 2ch programme, only DTV 2ch is available
and the other two items are greyed out in the menu.
This allows you to easily adjust according to each
condition.
• When watching a DTV 5.1ch programme, this
feature is not available.