Repeat
(only when DTV Clock set to On): Select the
desired on timer operation (
Once
,
Every Day
,
Mon-
Fri
,
Mon-Sat
,
Sat-Sun
)�
Input
: Select a video input source (ATV, DTV, EXT 1,
EXT 2, EXT 3, EXT 4, HDMI 1, HDMI 2, HDMI 3,
HDMI 4 or PC)�
Channel
: Set the channel that will be tuned when the
TV turns on�
Note:
When an external input is selected in the Input
field, this feature cannot be selected.
Volume
: Select the volume level that will be set when
the TV turns on�
Time until Power On
(only for DTV Clock Off
mode): Set the amount of time from now until the TV
turns on using the
Number
buttons (maximum of 12
hours)�
5
When all the details have been entered, select
Done
and press
Q
to start the timer�
To cancel the On Timer
1
In the
On Timer
menu, select
Enable On Timer
�
2
Press
v
or
w
to select
Off
then press
s
or
r
to
select
Done
, and then press
Q
�
Setting the Sleep Timer
The Sleep Timer is especially useful if you want the TV to
turn itself off after a selected period of time�
1
From the
APPLICATIONS
menu, press
s
or
r
to
select
Sleep Timer
�
2
Press the
Number
buttons (0-9) to enter the amount
of time until the TV turns off� Alternatively, press
v
or
w
to adjust the time in blocks of 10 minutes up to
12 hours�
3
Press
P
to start the timer�
To cancel the sleep time:
Press
s
or
r
until the time is set to 00:00�
Resetting the TV
Reset TV
will reset all TV settings, including stored
channels, to their original factory values�
1
From the
SETUP
menu, press
s
or
r
until
Reset
TV
is selected�
2
Press
s
or
r
to select a channel or input, and then
press
Q
to watch�
In DTV mode, press
v
or
w
to select Favourites 1-4�
The number of favourites available depends on how
many favourite lists have been created�
Selecting the video input source
1
At any time by pressing on the remote control or
TV, a list will appear on screen showing all inputs and
external equipment�
To Next Page
Loading...
