Toshiba 40XV700A - Using the System Information; Local Time Settings; Digital Audio Output; Viewing the Software Licences

38
Other Digital TV features and settings
Using the System Information
This feature can be used to check the version of software
currently installed� When in DTV mode, it includes
additional diagnostic information such as signal strength,
signal quality, centre frequency, modulation, etc�
1
From the
SETUP
menu, press
s
or
r
until
System
Information
is selected�
2
Press
Q
to display the
System Information
�
TOSHIBA
System Information
2010
14.1.x.x Xxx xx 2010 - xx:xx:xx FW:xx
WEAK
Ch22
Poor
Ch25
Good
Ch35
Good
Ch46
Good
AVERAGE STRONG
Local Time Settings
• Thisfeatureisavailablewhen
Country
is set to
Australia
(
-
page 13)�
• Thisfunctionallowsyoutomanuallysetthetimezone.
Pleasenotethatifyoumanuallychangethetimezone
setting, all existing entries under Programme Timers will
become invalid as they are still based on the old time
zone.Itisrecommendedthatyoudeleteallentriesunder
Programme Timers before proceeding with the steps
described below�
1
From the
DTV Settings
menu, press
s
or
r
to
select
Local Time Setting
�
2
Press
Q
, and then press
s
or
r
to select
Time
Zone
�
3
Press
v
or
w
to select the item you want to set�
(
New South Wales
,
Northern Territory
,
Queensland
,
South Australia
,
Tasmania
,
Victoria
,
Western Australia
,
Australian Capital
Territory
)
Local Time Setting
Time Zone
Local Time
New South Wales
11:30
4
Press
s
to select
Local Time
, and then press
v
or
w
to set as required�
Viewing the Software Licences
The licences for the software used in this TV are available
for viewing on screen�
1
From the
SETUP
menu, press
s
or
r
until
Software Licences
is selected�
2
Press
Q
�
A screen will appear displaying all of the licencing
information required for the TV’s software�
Setting the Digital Audio
Digital Audio Output
1
From the
PREFERENCES
menu, press
s
or
r
to
select
AV Connection
, and then press
Q
�
2
Press
s
or
r
to select
Digital Audio Output
�
AV Connection
PC/HDMI 3 Audio
HDMI Settings
HDMI 3 Audio
Woofer
Digital Audio Output
Digital
Internal
Auto
PC
Input Labeling
3
Press
v
or
w
to select
Auto
or
PCM
Auto
: This mode outputs Dolby Digital or PCM to
the digital audio output socket providing it is
being broadcast�
PCM
: Selectthiswhena2chdigitalstereoamplieris
connected to the TV� When you select a Dolby
Digital or MPEG audio track, the sound is
converted to the PCM (2ch) format and output�
Dynamic Range Control
This feature allows control of audio compression for
digital TV programmes excluding those with MPEG-1 and
MPEG-2 audio�
1
From the
SOUND
menu, press
s
or
r
to select
Dynamic Range Control
�
2
Press
v
or
w
to select
On
or
Off
�