Toshiba 42C3000A - Picture Still and Position Adjustments; Picture Mode and Quality

19
Using the TV’s features (General)
• In the PC input mode (- page 25), the picture size
selection is wide or normal only.
• When DTV teletext (- page 28) or Subtitle (- page 31) is
displayed, the picture size selection is not available.
• In Digital TV, the picture size selections are Super Live 1,
Cinema 1, Wide, Super Live 2, Cinema 2 and 4:3.
• When using the PC mode, the moving image quality may be
deteriorated.
Using the picture still
•Press R to freeze the picture.
Even if an image is frozen on the TV screen, the pictures are
running on the input source. Audio continues to be output as
well.
To return to a moving picture, press R again.
Notes:
• If you use this function except for the purpose of your private
viewing and listening, it may infringe the copyright protected
by the copyright laws.
• In the PC input mode (- page 25), this function is not
available.
Adjusting the picture position - analog only -
Adjustment to the position of the picture may be made to suit
your viewing preferences.
1 Press M, then press  or  to display the SET UP
menu.
2 Press the  or  to select Picture position.
3 Press Q, then press  or  to select an item you want
to adjust.
4 Press  or  to adjust the settings as required.
Note:
When the picture format is in Wide or 4:3 mode, only the
Horizontal position can be adjusted.
Resetting the picture position - analog only -
This function resets your picture position settings to the factory
settings.
1 From the Picture position menu, press  or  to
select Reset.
2 Press Q.
Selecting the picture mode
You can select the picture quality instantly among three preset
modes and one user-set mode.
• Press N to select the desired picture quality.
Note:
In the PC input mode (- page 25), this mode is not available.
Adjusting the basic picture quality
1
In Digital TV, press
,
M then press  or  to display the
TV set up then press Q.
2 Press  or  to display the PICTURE menu.
3 In Analog TV, press M and  or  to display the
PICTURE menu.
4 Press  or  to select the Picture settings menu, then
press Q.
5 Press  or  to select an item you want to adjust, then
press  or  to adjust the settings as required.
(Moving) (Still)
ANT ATT
Manual tuning
OK
AV connection
OK
Picture position
OK
Auto tuning
OK
Language
SET UP
MENU
Back Watch TV
EXIT
English
Off
Reset
Horizontal position
MENU
Back Watch TV
EXIT
0
Picture position
Vertical position
0
OK
Horizontal position 0
Mode Picture quality
q Dynamic bright and dynamic picture
q Standard standard picture
q Mild soft picture
q Memory the picture quality you set
Selection 
Pressing

Back light darker lighter
Contrast lower higher
Brightness darker lighter
Color paler deeper
Tint reddish greenish
Sharpness softer sharper
Dynamic
PICTURE
MENU
Back Watch TV
EXIT
OK
Picture settings
Off
Base color adjustment
3D Color management
Active Backlight Control
On
Cinema mode
On
Tint
Color
Back light
MENU
Back Watch TV
EXIT
100
50
0
0
Sharpness
Contrast
100
Picture settings 1/2
Brightness
50
Contrast 100