EasyManua.ls Logo

Toshiba 42C3000A - Sound Adjustment

Toshiba 42C3000A
44 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
22
Using the TV’s features (General)
Sound adjustment
Setting the MTS (Multi-channel TV Sound)
- analog only -
Auto mode
The MTS Auto mode automatically recognize stereo/bilingual
programs depending on the broadcast signal.
1 Press M, then press or to display the SOUND
menu.
2 Press or to select MTS, then press or to select
Auto or Mono.
Mono mode
If you experience noise or poor reception of any stereo/
bilingual program, set the MTS mode to Mono.
Noise will be reduced and reception may improve.
Note:
If you experience noise with a particular program on whose
channel reception is usually good, try setting MTS mode to
Auto, then switch S to e Mono (monaural) (- page 22).
Selecting the dual 1 or dual 2 mode
- analog only -
You can hear only dual 1 or dual 2 sound selected, whenever
bilingual programs are received.
1 Press M, then press or to display the SOUND
menu.
2 Press or to select Dual, then press or to select
Dual 1 or Dual 2.
Notes:
When the MTS setting is in Mono mode, the Dual menu is
not selectable.
The Dual menu setting status remains even if the TV is
turned off.
Selecting the stereo programs - analog only -
1 When a stereo program is received, d Stereo appears.
2 Press S to select the stereo/monaural mode. d Stereo
and e Mono appear cyclically on the screen.
Selecting the bilingual programs - analog only -
1 When a bilingual program is received, j Dual appears.
2 Press S to select the sound to be heard. The sound
differs according to the transmission system: NICAM or
German stereo/bilingual broadcast.
Note:
These settings are not stored in the TV memory.
Adjusting the sound quality
1
From the SOUND menu, press or to select an item
you want to adjust.
2 Press or to adjust the settings as required.
Dual
MTS
SOUND 1/2
MENU
Back Watch TV
EXIT
Auto
Dual 1
Treble
Bass
0
0
0
Balance
WOW
OK
Stereo
Display
Sound to be heard
NICAM
German stereo/
bilingual broadcast
j Dual 1 Sub I sound Main sound
J Dual 2 Sub II sound Sub sound
e Mono Main sound
Selection Pressing
Bass weaker stronger
Treble weaker stronger
Balance decreases the right
channel
decreases the left
channel
Dual 1
Bass 0

Table of Contents

Related product manuals