Toshiba 42C3000A - TV Back Panel Connections

9
Getting started
TV back panel connections
AV OUTPUT
PC/HDMI
(AUDIO)
TV back view
Cable holder*
Power cord
15
12
13
14
16 17 18 19
* You can use the cable holder to
hold antenna cable, video and
audio cables etc.
When moving the TV, never
hold this holder.
12 o (1) (Video 1 input terminals) — High-definition
component video or standard (composite) video and
standard (analog) stereo audio inputs (- page 33).
13 O AV OUTPUT (output terminals) — For use when
connecting a VCR/HDD/DVD video recorder with
standard video and standard audio inputs (- page 33).
No On-Screen-Display will output from this terminals.
14 o PC/HDMI1 (AUDIO) (input terminals) — For use
when connecting a personal computer (PC) or a DVI
device with standard audio output (- page 33, 36).
15 A (Antenna input terminal) — Analog antenna signal
input (- page 7).
16 o RGB/PC (input terminal) — For use when
connecting a personal computer (PC) (- page 37).
17 O DIGITAL AUDIO (optical) (output terminal) —
For use when connecting an amplifier with optical type
digital audio input (- page 33).
18 O DIGITAL AUDIO (coaxial) (output terminal) —
For use when connecting an amplifier with coaxial type
digital audio input (- page 33).
19 o HDMI1 and o HDMI2 (input terminals) — High-
Definition Multimedia Interface input receives digital
audio and uncompressed digital video from an HDMI
device or uncompressed digital video from a DVI device
(- page 35).