45
Introduction
Getting started
Basic operation
Using TV’s features
Equipment
connections
Reference section
Viewing teletest
Equipment connections
Back connections
Connection example
Computer
DVD video player
(with component
video outputs)
VCR (Recording)
Audio system
(see page 24, 27)
Woofer system
with amplifier
(see page 28)
• Before connecting any external equipment, turn off all main power switches.
• Before connecting any external equipment, remove the back terminal cover (see page 11).
• Connect either the S-VIDEO input terminal or VIDEO input terminal, whichever terminal is used.
Do not connect both of these terminals.
• In addition, there is a fixed/variable external audio output which enables the connection of a suitable audio
system. A 3.5 mm switched phono socket allows an external active Woofer system to be connected.
• The COMPONENT VIDEO INPUT consists of three component video jacks (Y, P
B/CB, PR/CR) and provides the
best picture performance. These jacks can only be used with the component video compatible equipment e.g. DVD
video player etc.
• Additional equipment and cables shown are not supplied with this TV.
VCR
(S-Video or Normal )
TV back view
Set Top Box
HDMI or DVI device
(see page 49)
To Next Page
Loading...