Toshiba 42WP48A - Connecting a Computer; To Connect a Computer

46
Equipment
connections
Equipment connections
Connecting a computer
Before connecting PC and audio cables, remove the back terminal covers (see page 11).
An analog RGB (15 pin) computer cable can be connected.
To connect a computer
Connect a PC cable from the computer to the RGB/PC input terminal on the back of the TV.
The following signals can be displayed:
• VGA: 640 x 480 @ 60 Hz
• SVGA: 800 x 600 @ 60 Hz
• XGA: 1024 x 768 @ 60 Hz
If you connect this unit to you PC, the compressed images are displayed in SVGA and XGA modes; therefore the
picture quality may deteriorate and characters may not be read.
Notes:
• The color blur on the picture may occur according to input signals.
• Some PC models cannot be connected to this TV.
• There is no need to use an adapter for computers with DOS/V compatible mini D-sub 15 pin terminal.
• A bar may appear in the upper, lower, right or left side of the screen, or parts of the picture may be obscured
depending on some signals. This is not the malfunction.
• If the edges of the picture are stretched, readjust the picture size/position adjustments in the PC Setting menu.
• Depending on the specification of the PC you are playing the DVD-Video on, and the DVD’s title, some scenes may
be skipped, or you may not be able to pause during multi-angle scenes.
Signal names for mini D-sub 15 pin connector
Audio cable for
PC-to-TV connection
Conversion adapter
(if necessary)
RGB PC cable
Mini D-sub
15 pin
Computer
TV back view
Pin assignment
for RGB/PC
terminal
Pin No. Signal name Pin No. Signal name
1R 9 NC
2 G 10 Ground
3B 11 NC
4 NC (not connected) 12 NC
5 NC 13 H-sync
6 Ground 14 V-sync
7 Ground 15 NC
8 Ground
11
15
6
10
1
5