Toshiba 46L5200U - Chapter 6: TV Features - HDMI-CEC Control; Using HDMI-CEC; Controlling HDMI-CEC Devices

109
Using the TV’s features
Using HDMI®-CEC
3 Press the ( / arrow) buttons to highlight the item you want
to change, and press the ( / arrow) buttons to select On or
Off.
❖ Default setting for this feature is On.
❖ A warning message will appear 1 minute before the TV turns off.
Using HDMI
®
-CEC
This is a new feature that uses CEC technology and allows you to
control Toshiba HDMI
®
-CEC compatible devices from the TV
remote via HDMI
®
connection (see “HDMI®-CEC connection” on
page 31).
When Enable HDMI
®
-CEC in the HDMI
®
-CEC Setup menu is
set to On (see “Setting up HDMI®-CEC” on page 112), the
HDMI
®
-CEC functions described below will be enabled.
HDMI
®
-CEC playback device (DVD player, etc.) control
With your TV’s remote control, or using the HDMI
®
-CEC Player
Control menu, you can control the connected
HDMI
®
-CEC playback device you are watching.
Available remote control key functions
These functions depend on the devices connected.
Button: Description:
PLAY Begin playback
STOP Stop playback
PAUSE Pause the picture during play or record mode
SKIP Forward Skip Forward
SKIP Reverse Skip backward
FF Fast forward
REW Rewind/reverse
/// Navigates menu options
ENTER Enters menu options
EXIT Return to the previous menu
NOTE
NOTE