33
Connecting Your TV
Connecting a digital audio system
Connecting a digital audio system
The TV’s DIGITAL AUDIO OUT terminal outputs a Dolby
®
Digital or 2-channel down-mixed PCM (pulse-code modulation)
signal for use with an external Dolby Digital decoder or other
external audio system with optical audio input.
You w ill ne ed an Op ti cal au di o c ab le (U s e an op t ic al aud io c a ble
that has the larger “TosLink” connector and not the smaller
“mini-optical” connector.)
(Sample Illustration) L5200U Series—Connecting a digital audio
system
To control the audio:
1 Turn on the TV and the digital audio device.
2 Press the MENU button on the remote control and open the
Sound menu.
3 Press the ( / arrow) buttons to highlight Audio Setup, and
then press the ENTER button.
(Sample Image) Sound menu - Audio Setup selection
Dolby Digital decoder or
TV back panel
other digital audio system
To Next Page
Loading...
