51
Setting up your TV
Storing channels in memory (optional)
3 Open the Terrestrial menu, highlight Input Configuration,
and then press the ENTER button.
(Sample Image) Terrestrial menu - Input Configuration selection
4 Highlight ANT/CABLE In and press the ( / arrow) buttons
to select the input source (Cable or Antenna).
(Sample Image) Input Configuration screen
5 To save your new settings, highlight Done, and then press the
ENTER button. To revert to your original settings, highlight
Cancel, and then press the ENTER button.
Storing channels in memory (optional)
To make sure your TV stops only on the channels you want when
you press the CH arrow buttons on the remote control or the control
panel, store those channels in the TV’s memory.
Auto Tuning
You c a n se t up t h e T V t o d et ec t al l active channels in your area and
store them in its memory. Then you can manually add or erase
individual channels from memory.
To Next Page
Loading...
