60
Using the TV’s features
Selecting the video input source
❖ Repeatedly press the INPUT button on the remote control
or TV control panel to change the input setting.
The current signal source displays in the top right corner of the
Input Selection screen.
(Sample Image) L4200U Series Input Selection screen
(Sample Image) L5200U Series Input Selection screen
❖ You can label the video input sources according to the specific
devices you have connected to the TV, see “Labeling the video
input sources” on page 61.
❖ Sources can be “hidden,” see “Labeling the video input sources”
on page 61.
❖ “No video signal” will appear randomly on the screen if no
signal is received in video input mode.
❖ If a CEC device is connected to an HDMI
®
input, the
HDMI
®
-CEC icon appears.
VCR
To Next Page
Loading...
