17
SETTING UP YOUR TV
a Press MENU and using C or c select the SETUP menu.
With
b highlight ATV Manual Tuning and press Q
to select.
b Use B or b to highlight the desired position. We
suggest Pos. 0 for a media recorder.
c Press Q to select. If the channel chosen for the media
recorder is set to skip, Skip should be removed before
storing.
d Press c to select System and use B or b to change
if required.
e Then press c to select Search.
f Press B or b to begin the search. The search symbol
will flash.
g Each signal will show on the television. If it is not your
media recorder, press
B or b again to restart the
search.
h When your media recorder signal is found, press c
to move along to Station. With
B, b, C and c put
in the required characters, e.g. VCR.
i Press Q to save.
j Repeat for each position you want to tune, or press
RETURN to return to the list of channels and select the
next number to tune.
k Press EXIT when you have finished.
l To name external equipment, e.g. DVD on EXT 2,
press
o to select o2, then select Manual Settings
from the SETUP menu.
m Press c to select Label then using B, b, C and c put
in the required characters, and then press
Q to save.
Different Channel numbers may be displayed.
SETUP
Menu Language English
Country
Ant/Cable In
Auto Tuning
ATV Manual Tuning
DTV Settings
DTV Manual Tuning
Germany
Antenna
AV Connection
Pos. Channel Station
ATV Manual Tuning
1
2
3
4
6
7
8
C2
C7
S10
S40
C22
5
C25
C28
C30
ATV Manual Tuning
System: I
1 A C 2 0
I
ATV Manual Tuning
Search:
1 C 2 0 IA
This television has direct channel entry if the
channel numbers are known.
Select the ATV Manual Tuning screen in Step 3.
Enter the Position number, the System, then C for
standard (terrestrial) channels or S for cable
channels and the Channel number. Press Q to
save.
ATV Manual Tuning
Station: VCR
1 A C 2 0 V C R I
Manual Settings
Label: DVD
EXT 2 A D V D
To Next Page
Loading...
