48
CONTROLS AND FEATURES
PC Settings
Connect the PC (as shown in the ‘Connecting a PC’ section)
and ensure that a picture is showing on the television screen.
The picture position may now be adjusted to suit personal
preference.
a Press o to select PC, and then select PC Settings from
the SETUP menu.
b Press Q. Press B and b to select an option, then C
or
c to adjust the settings.
The Clock Phase matches the PC signal with the LCD display.
Adjusting this can clear horizontal stripes and picture blur.
a In the SETUP menu, press b until PC Settings is
highlighted.
b Press Q to select, and then b to highlight Clock
Phase.
c Use C or c to adjust until the picture clears.
Adjusting the Sampling Clock alters the number of pulses per
scan, this will clear vertical lines on the screen.
a In the SETUP menu, press b until PC Settings is
highlighted.
b Press Q to select, and then b to highlight Sampling
Clock.
c Use C or c to adjust until the picture clears.
Use Reset to return all items to the original factory settings.
a In the SETUP menu, press b until PC Settings is
highlighted.
b Press Q to select, and then b to highlight Reset.
c Press Q.
NOTE: When a PC is connected using HDMI, none of these
functions will be available.
The screen is disrupted momentarily when adjusting PC
Settings. This is not a sign of malfunction.
The default settings and adjustment ranges may vary
depending on the input signal format.
Horizontal and Vertical Position
Clock Phase
SETUP
Country Germany
Ant/Cable In
Auto Tuning
ATV Manual Tuning
DTV Manual Tuning
AV Connection
DTV Settings
Antenna
PC Settings
0
0
0
0
PC Settings
Horizontal Position
Reset
Sampling Clock
Vertical Position
Clock Phase
Sampling Clock
Reset
To Next Page
Loading...
