Toshiba 58L7350UC - Base Color Adjustment; Color Temperature

Picture and Sound Controls
111
Base Color Adjustment
When ColorMaster™ is set to On, the list of base colors appears.
You can select a base color to adjust.
1 Press the SETUP button.
2 Select Picture > Advanced Picture Settings > Base Color
Adjustment.
3 Press the OK button.
The Base Color Adjustment screen appears.
4 Press the
p
/
q
(arrow) buttons to select a color. Press the
u
(arrow)
button.
5 Press the
t
/
u
(arrow) buttons to select Hue, Saturation, or
Brightness.
6 Press the
p
/
q
(arrow) buttons to adjust the setting.
7 Repeat Steps 4 through 6 to adjust other colors. To reset the
adjustments to the factory defaults, select Reset on the screen, and
then press the OKbutton.(Aconrmationscreenappears.Pressthe
◄/►(arrow)buttonstoselectYes , and then press the OK button.)
Color temperature
1 Press the SETUP button.
2 Select Picture > Advanced Picture Settings > Color Temperature
and press the OK button.
3 Select Color Temperature and press the OK button. Press the
p
/
q
(arrow) buttons to select Cool, Medium, or Warm.
4 Press the OK button.
5 Select Color Temperature and press the OK button. Press the
p
/
q
(arrow) buttons to select the Red Level, Green Level, or Blue
Level.
6 Press the
u
(arrow) button.
7 Press the
t
/
u
(arrow) buttons to adjust the level. The adjustment
range is -10 (less of selected color) to +10 (more of
8 selected color).
9 Press the EXIT button.
NOTE
This feature is not available in Standard and Movie mode.
Using the advanced picture settings features