Toshiba 58L7350UC - Viewing Support Information; Resetting to Factory Defaults; Power Failure

Basic features
99
❖
Current display mode (Side by Side, Top and Bottom, or Frame
Packing)
❖
Current display format (3D, 2D to 3D, or 3D to 2D)
❖
Input video format (3D appears when video format is 3D)
To close the screen, press the INFO button again.
The following additional information (only available for ANT/CABLE
input) will display for digital channels (if applicable):
❖
Title
❖
Duration
❖
Detailed description
❖
Next program’s information
Viewing support information
1 Press the SETUP button.
2 Select Get Help > System Information.
3 Press the OK button to display support information containing Web/
Customer service numbers for US, Canada, and Mexico.
Resetting to Factory Defaults
You can reset all settings and channels to Factory Defaults.
1 Press the SETUP button.
2 Select Installation > Reset TV.
3 Enter your PIN code (if a PIN code has been set).
Aconrmationscreenappears.
4 Select Ye s , and then press the OK button.
The TV will turn off automatically.
To cancel the reset:
❖
Press the
t
/
u
(arrow) buttons to select No, and then press the OK
button.
Power failure
If power is lost while you are watching the TV, the Last Mode Memory
feature automatically turns on the TV when power is restored.
Viewing support information