Toshiba 58L7350UC - Connecting a computer

Connecting Your TV
41
Connecting a computer
With either the PC IN or HDMI
®
connection, you can view your
computer’s display on the TV and hear the sound from the TV’s speakers.
Connecting a computer to the TV’s PC IN terminal
When connecting a computer to the PC IN terminal on the TV, use an
analog RGB (15-pin) computer cable and a PC audio cable. For more
information, see “Overview of cable types” on page 27.
Conversion adapter
(if necessary)
PC audio
cable
PC audio
output
PC / HDMI 2
AUDIO
PC ININ
TV back panel
(Sample Illustration) L7350UC Series—Connecting to a computer
through analog RGB cable
To use a computer, set the monitor output resolution on the computer
before connecting it to the TV. The supported signal formats are VGA,
SVGA,XGA,WXGAandSXGA.Fordetailedsignalspecications,see
“Acceptable signal formats for PC IN, and HDMI
®
, and 3D” on page 182.
Other formats or non-standard signals will not be displayed correctly.
To display the optimum picture, use the computer setting feature, see
“Using your computer with the TV” on page 94.
NOTE
❖
The PC audio input terminal on the TV is shared with the HDMI 2
terminal. For configuration information, see “Setting the computer
audio” on page 95.
❖
Some computer models cannot be connected to this TV.
Connecting a computer