Toshiba 58L7350UC - Using the TV remote and HDMI CEC Control to control other devices

Connecting Your TV
39
Using the TV remote and HDMI
®
CEC Control to control other
devices
To control the basic functions of connected audio/video devices using the
TV’s remote control, connect an HDMI
®
CEC compatible audio system or
playback device. The HDMI
®
CEC Control feature uses CEC technology
as regulated by the HDMI
®
standard.
HDMI OUT HDMI IN
HDMI OUT
HDMI OUT
HDMI IN
HDMI IN
4
TV back panel
HDMI
®
cable
HDMI
®
cable
Playback device
Audio receiver
Playback device
(HDMI
®
CEC DVD player, etc.)
(HDMI
®
CEC DVD player, etc.)
(Sample Illustration) L7350UC Series—Connecting an HDMI
®
CEC
compatible audio system and playback device
To connect an audio system and playback devices, you will need HDMI
®
cables, see “HDMI
®
cable (with HDMI Logo)” on page 28.
NOTE
❖
If several devices are connected, HDMI
®
CEC Control feature may not
operate properly, see “HDMI
®
CEC Control input source selection” on
page 92.
For proper operation, it is recommended that you use HDMI
®
cables
with the HDMI
®
Logo ( ).
❖
HDMI
®
CEC devices can be controlled by TV remote only when it is
the TV mode.
Before controlling the devices:
❖
For an explanation of setup and operations, see “Other HDMI
®
CEC
Control functions” on page 93.
❖
Conguretheconnecteddevices.Seeeachdevice’soperation
manual.
NOTE
This feature is limited to models incorporating Toshiba’s HDMI
®
CEC
Control feature. However, Toshiba is not liable for those operations. See the
individual instruction manuals for compatibility information.
Using the TV remote and HDMI
®
CEC Control to control other devices
Connecting an HDMI
®
or DVI device to the HDMI
®
input