Toshiba BMS-TP0641ACE - Page 30

EN-30
17
Setting/changing/deleting operating
schedule
A Push a day of the week button.
The Operating Schedule Setting screen
(Fig. 17-2) appears.
<Addition>
B Push [Addition].
The Operating Schedule Detail Setting screen
(Fig. 17-3) appears.
C Set time for operation ON or OFF with the
▲ and ▼ buttons.
D Push [ON] to run or [OFF] to stop.
To undo the setting to the previous state, push
[Undo].
E Confirm the setting, and then push [OK] on the
Detail Setting screen.
If you do not add the operating schedule, push
[Cancel] on the Detail Setting screen.
<Change>
F Push a number (1 to 20) whose operating
schedule you want to change.
The schedule list ranges on two pages.
G Switch the list using the [Previous ▲] and
[Next ▼] buttons.
The Detail Setting screen (Fig. 17-3) appears.
H When you change ON or OFF time, use the
▲ and ▼ buttons.
I Push [ON] or [OFF] to change ON/OFF mode.
To undo the changed setting to the previous
state, push [Undo].
J Confirm the setting, and then push [OK] on the
Detail Setting screen.
If you do not change the operating schedule,
push [Cancel] on the Detail Setting screen.
Fig. 17-2 Operating Schedule Setting Screen
Fig. 17-3 Operating Schedule Detail Setting Screen
Checking/Setting Operating Schedule (continued)
Fig. 17-1 Operating Schedule Check Screen
HOW TO OPERATE (continued)
A
FK
O B
GL
When not setting (O)
HC M DIEJN
To undo (D, I)