130
Utilities
System Settings
❖ Display—Allows you to change various default settings
for the built-in display
When the computer restarts, it remembers the last
configuration. If data does not appear on the display you
are using after starting in Sleep mode, press the
( ) + P
keys to toggle the display. For more information, see
“Directing the display output when you turn on the
computer” on page 72.
❖
General—Allows you to view the current BIOS version
or change certain settings back to their default values
❖
HDD Protection—Allows you to enable or disable HDD
Protection
❖
Keyboard—Allows you to access the wake-on
keyboard function, or to configure the function keys
❖
LAN—Allows you to set networking functions
❖
ODD tray lock—Allows you to set conditions for ODD
tray lock
❖
SATA—Allows you to set conditions for SATA
❖
Sleep Utilities—Allows you to enable or disable Sleep
and Charge/Sleep and Music functions.
❖
Sleep and Charge—Allows you to charge USB
compatible external devices.
❖
Sleep and Music—Allows you to listen to music
stored on a portable audio device using the
speakers when the computer is OFF. Power OFF
includes Sleep Mode, Hibernation Mode, or
Shutdown state.
❖
USB—Allows you to enable or disable USB Legacy
Emulation and internal USB 3.0 controller
NOTE
To Next Page
Loading...
Need help?
General
