Toshiba CANVIO - 3-2 Dismount and disconnect from your Windows PC

User’s Manual EN-39
CANVIO for Smartphone
(b) If your Windows
®
PC has a “Type-C” USB connector, connect to
“CANVIO for Smartphone” with a USB 2.0 Type-C™ cable.
■ The power/data indicator light will illuminate.
■ The drive will power up.
■ The drive should mount and a new drive icon should appear in
“My Computer”.
3-2 Dismount and disconnect from your Windows
®
PC
We strongly recommend that you do not unplug the drive by simply
unplugging the cable connection since data may be in the process of being
written to the drive at that time.
Any such data will be lost and the drive may be damaged physically!
Please follow the steps below to safely dismount the drive.
1. Click the “Hardware and Eject Media” icon
A pop-up message box will appear listing the external devices
connected to your computer.
2. Select the TOSHIBA drive to eject.
After a few seconds, you will get the notification that it is now safe to
remove the device.
3. Click “OK” and you can unplug the “CANVIO for Smartphone”.