Toshiba Business Communication
Systems
Telephone and Voice Mail
Orientation Guide
Telephone Quick Reference 1 .doc
ix
Conference Calls
Step 1 - While on a call, press the Cnf/Trn button. You will then hear dial tone and the light
next to that line will blink.
Step 2 - Call another ext. or if contacting an outside line press 9 and the number.
Step 3 - Once the other party answers, announce the caller and press Cnf/trn again to
connect all parties.
To have additional parties on the line, follow these steps for each caller. The person who
connects all the callers is the Master controller. If the Master hangs up the first person
contacted becomes the Master. You may have up to 7 callers on one conference call
including yourself.
Only the master may place a conference call on hold. All other parties on the call may
continue. To re-join the call press the ext. button the conference is on.
Step
1 & 3
Step
#2
To Next Page
Loading...
