73
EN
Introduction Connections
Basic Setup /
TV View Operation
Recording Playback Editing Function Setup Others
* If you are still having trouble with the unit after checking all the Troubleshooting points, write down the error code and the error
description and consult your dealer.
Recording Error
You cannot record more than 254
chapters on one disc.
(The maximum is 254)
• You are trying to record onto the
DVD+RW disc on which the number of
recording chapters comes up to the
maximum (254).
• Delete unnecessary chapter marks.
(See page 56.)
Recording Error
You cannot record on this disc as
Control Information is full.
• This disc has no space to write Control
Information when recording or deleting
contents.
• When editing has been repeatedly
performed, the control information area
may become full even though the
recording area has enough space.
• Delete unnecessary original titles.
(See page 54.)
Recording Error
You cannot record on this disc as
Power Calibration Area is full.
• When recordings are performed
repeatedly onto an unstable disc, this
area may become full.
• Every time you insert a disc for
recording, part of the disc’s working area
will be used. If you repeat this frequently,
it will be used up quicker and you may
not be able to record maximum number
of titles for the disc.
• Insert a new disc.
Recording Error
This disc is already finalised.
• You are trying to record onto a disc that
is already finalised.
• Release the finalising for the disc.
(See page 40.)
Recording Error
The disc has no recording
compatibility.
Set “Make Recording Compatible” to
“ON” to convert the disc.
• You are trying to record onto the
unfinalised +VR mode discs recorded on
other unit.
• Set “Make Recording Compatible” to
“ON” to rewrite the menu, after that you
will record to disc. (See page 29.)
Error message Cause Solution
E7TE0BD_EN.book Page 73 Friday, March 5, 2010 5:08 PM
To Next Page
Loading...
Need help?
General
