Touch Key Tone Setting 141
Touch Key Tone Setting
This section describes how to switch ON/OFF the touch tone when the buttons on the control
panel are pressed.
The menu of this setting is displayed only when the Fax Kit (optional) is not installed. When it is
installed, all of the volume can be adjusted.
P.139 “Volume Adjustment”
1
Press the [USER FUNCTIONS] button.
The “user functions mode” main screen is displayed.
2
Select “DEFAULT SETTINGS” with and buttons, and then
press the [ENTER] button.
3
Select “GENERAL SETTING” with and buttons, and then
press the [ENTER] button.
4
Select “TOUCH KEY TONE” with and buttons, and then
press the [ENTER] button.
USER FUNCTIONS
1216
01.DEFAULT SETTINGS
02.LISTS
03.INITIAL SETUP
DEFAULT SETTINGS
01.GENERAL SETTING
02.COPY SETUP
03.FAX SETUP
GENERAL SETTING
03.TIMERS
04.WEEKLY TIMER
05.TOUCH KEY TONE
To Next Page
Loading...
