Preparation 2 - Placing Copy Paper 41
Placing paper in the drawers of Paper Feed Pedestal (optional)
Follow the procedure below to place copy paper in the drawers of the Paper Feed Pedestal
(optional).
For the acceptable paper, see the following page:
P.35 “Acceptable media types”
1
Pull out the drawer carefully.
Pull out the drawer until it comes to a stop.
2
Pull out the trailing guide while pushing its lower part to the direc-
tion of the arrow. Then reinstall the guide at the position of the
desired paper size.
The paper size is indicated on the bottom inner surface of the drawer.
To Next Page
Loading...
