1.Information About Equipment
30 Logging in
After the operation
To prevent unauthorized use of the equipment, log out following the procedure below.
1. Perform either of the operations below.
- Press the [ACCESS] button on the control panel.
- Press the [FUNCTION CLEAR] button on the control panel twice.
2. On the confirmation screen, select [Yes].
1
The menu for user authentication appears.
MFP local authentication
Windows Domain authentication, LDAP authentication
The domain name is displayed in [Domain]. For LDAP authentication, the LDAP server name is displayed in [LDAP]
instead of [Domain].
If the displayed domain name or LDAP server name is not yours, press to select yours.
2
Enter the user name (up to 128 letters) and password (up to 64 letters), and then press [OK].
3
The equipment is available for use.
To Next Page
Loading...
