110
4.SETTING ITEMS (ADMIN)
3.SETTING NETWORK FUNCTIONS (Cont.)
4
3
Press the [STATIC] button in the “ADDRESS MODE” option.
4
Press the [IP ADDRESS] button and enter the IP address of this
device using the digital keys. Enter also the subnet mask and default
gateway as required.
5
Press the [ENTER] button.
• Returns you to the NETWORK menu.
6
Continue to another network setting if required, then press the
[APPLY NOW] button.
• The "NETWORK INITIALIZING" message is displayed and this equipment starts initializing the network inter-
face card to apply the changes.
To Next Page
Loading...
