143
5
4
Press the [BASIC] button to enter the basic menu, and then select the
copy size (LT).
• When using this mode in bypass copying ( P.73), be sure to specify the paper size.
• Select other copy modes as required.
6
Turn to the next page, set the book again, and then press the [START]
button.
• Repeat this step until all the originals have finished being scanned.
7
After all the originals have finished being scanned, press the [FIN-
ISHED] button.
• Press the [COPY FINAL PAGE] button if the last original is a 1-sided page.
5
Place the first page(s) to be copied on the
glass, and then press the [START] but-
ton.
• Center the book on the yellow indicator line with the bottom
toward you. ( P.61 “Book-type originals”)
Do not place heavy objects (9 lb. or more) on the original glass and
do not press on it with force. Breaking the glass could injure you.
To Next Page
Loading...
Need help?
General
