181
5
ECM
*1
Shows whether the ECM is enabled or dis-
abled.
YES
INITIAL SETUP - MONITOR VOLUME
*1
Shows the monitor volume setting.
NO
INITIAL SETUP
- COMPLETION TONE VOLUME
*1
Shows the complete volume setting.
NO
INITIAL SETUP - RX MODE
*1
Shows the default RX mode.
NO
INITIAL SETUP - DIAL TYPE
*1
Shows the dial type of the line 1.
NO
INITIAL SETUP - DIAL TYPE (LINE2)
*2
Shows the dial type of the line2.
NO
LINE-2 MODE
*2
Shows the line2 mode.
NO
LINE-2 MODE - START
*2
Shows the start time to use the Line2 for
receptions only. This applies only when “RX
ONLY (TIMER)” is set to the LINE-2 MODE.
NO
LINE-2 MODE - END
*2
Shows the end time to finish using the Line2
for receptions only. This applies only when
“RX ONLY (TIMER)” is set to the LINE-2
MODE.
NO
RX PRINT - DISCARD Shows whether the discard function is
enabled or disabled.
NO
RX PRINT - REDUCTION Shows whether the reduction is enabled or
disabled.
NO
RX PRINT - DUPLEX PRINT
*1
Shows whether the duplex print is enabled
or disabled.
NO
RX PRINT - ROTATE SORT
*1
Shows whether the rotate sort is enabled or
disabled.
NO
RECOVERY TX - STORED TIME
*1
Shows how many hours that a recovery
transmission job is to be stored.
NO
FAX RECEIVED FORWARD - AGENT1
*1
Shows the agent type if the Fax Received
Forward is registered.
NO
FAX RECEIVED FORWARD - AGENT2
*1
Shows the agent type if the Fax Received
Forward is registered.
NO
*1. These are printed only when the optional Fax unit is installed.
*2. These are printed only when the optional Fax unit and optional Line2 board are installed.
FAX
Function Description User
To Next Page
Loading...
